REVIEW OF THE BASIC MECHANICAL PROPERTIES OF STRUCTURAL CERAMIC MATERIALS USED FOR THE MANUFACTURE OF PROSTHESES IN A SINGLE TOOTH (ARTIFICIAL TOOTH CROWNS, INLAYS, VENEERS)
https://doi.org/10.25207/1608-6228-2017-2-138-141
Abstract
The aim of this work was to obtain data of the strength properties of structural ceramic materials used in the manufacture of non-metal constructions of dentures. As a method of ceramic processing was the selected method waterjet cutting. Was obtained for 10 samples Lacanau ceramic, hybrid and feldspatic ceramic. According to ISO 6872 conducted testing of samples for strength by the method of three-point bending. On the basis of your data we recommend that the materials exclusively for the manufacture of artificial crowns import and sale within the length of one tooth, such as inlays and veneers.
About the Authors
A. A. ELKHANOV
Stavropol state medical University
Russian Federation
Russian Federation
Department of prosthetic dentistry
Russia, 355017, Stavropol, World str., 310, tel. 8 (928) 308-96-32
E. A. BRAGIN
Stavropol state medical University
Russian Federation
Russian Federation
Department of prosthetic dentistry
Russia, 355017, Stavropol, World str., 310, tel. 8 (928) 308-96-32
A. E. BRAGIN
Stavropol state medical University
Russian Federation
Russian Federation
Department of prosthetic dentistry
Russia, 355017, Stavropol, World str., 310, tel. 8 (928) 308-96-32
References
1. Жолудев Д.С. Керамические материалы в ортопедической стоматологии/ Д.С. Жолудев//Проблемы стоматологии. – 2012. – № 5. – С. 8-14.
2. Захаров Д. З. Современные керамические материалы, используемые в ортопедической стоматологии для изготовления зубных протезов/ Д.З. Захаров// Стоматология. – 2009. – № 2. – С. 80-82.
3. Перспективы использования наноматериалов и высоких технологий в ортопедической стоматологии. Часть 1. / Н. Б. Асташина [и др.] // Стоматология. – 2014. – № 1. – С. 37-39.
4. Стоматологическое материаловедение/ под ред. проф.С.Н. Гаражи. – Ставрополь, 2012.
5. Alshehri S. A. An investigation into the role of core porcelain thickness and lamination in determining the flexural strength of In-Ceram dental materials / S. A. Alshehri // J Prosthodont. – 2011. – Vol. 20. – № 4. – P. 261-266.
6. Biaxial flexural strength of CAD/CAM ceramics / L. Buso [et al.] // Minerva Stomatol. – 2011. – Vol. 60. – № 5. – P. 311-319.
7. Comparison of shear bond strength of orthodontics bracket s on composite resin restorations with different surface treatments / A. A. Ribeiro [et al.] // Dental Press J Orthod. – 2013. – Vol. 18. – № 4. – P. 98-103.
8. Dentistry — Ceramic materials: International standard 6872. – Geneva, 2015. – 28 p.
9. Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four diffe rent provisional restorations / Y. S. Jabbari [et al.] // Angle Orthod. – 2014. – Vol. 84. – № 4. – P. 649-655.
10. Physical and adhesive properties of dental enamel after radiotherapy and bonding of metal and ceramicbrackets / G. C. Santin [et al.] // Am J Orthod Dentofacial Orthop. – 2015. – Vol. 148. – № 2. – P. 283-290.
Review
For citations:
ELKHANOV A.A., BRAGIN E.A., BRAGIN A.E. REVIEW OF THE BASIC MECHANICAL PROPERTIES OF STRUCTURAL CERAMIC MATERIALS USED FOR THE MANUFACTURE OF PROSTHESES IN A SINGLE TOOTH (ARTIFICIAL TOOTH CROWNS, INLAYS, VENEERS). Kuban Scientific Medical Bulletin. 2017;1(2):138-141. (In Russ.) https://doi.org/10.25207/1608-6228-2017-2-138-141
Views:
432
Email this article 